Nature Power Marine Grade 400 Watt Wind Turbine (70500) - Manual (Page 9)

Wind T urbine G enerator
The controller Indicator Lamp
9
6.1. Single wind generator
See Diagram below for further wiring information
Mode Lamp LED reading Status Cause Operation
Normal mode
Normal mode
Normal mode
Normal mode
Stop mode
Stop mode
No light 0. 0.
Solid Green
Flashing red
Solid red
Solid red
Flashing red
about 2sec
Current
power
0. 0.
0. 0.
No
display
0. 0.
No
display
not reach charging
wind speed
Charging wind
speed to 12m/s
Rotor rotating at low
spin or stop
Rotor rotating at low
spin or stop
Rotor rotating at low
spin or stop
rotation and stop
suddenly
Rotor rotating at
500-1400rpm
Battery fully charged
(voltage exceeds14.2V)
Over speed, Rotor
rotating over 1400rpm
Battery voltage
exceeds17.5V
Controller
temperature
exceeded 85C
No Battery or cable
loose
Normally
Normally
Normally
Waiting 15mins,
then restart the
system
System returns
tonormal mode
if the battery
voltage drops
below 13.2V.
System returns to
normal mode if
controller
temperature drops
below 60C
Connect with battery
the system come to
normal
Rotor not reaching 500rpm
charging speed