Autostart CT-1010 User Manual

Page 6

Advertising
background image

P. 6

Installation Guide

0

MODE 2

* INDICATES DEFAULT SETTING

FUNCTION 1 – Re-lock

OPTION 1

Disabled

OPTION 2*

Enabled – Relock all doors 60 seconds after unlocking and no door nor trunk is

opened

FUNCTION 2 – Siren / Horn Chirps

(Available only on some models)

OPTION 1

Warning chirp only – Lock confirmation if Lock button is pressed more than once

- 3 chirps if a door is opened and Lock button pressed

- 4 chirps if Unlock button is pressed and an intrusion occurred

OPTION 2*

Chirp enabled

OPTION 3

Chirp enabled with open-zone notification

(Siren / Horn warning 10sec after arming if a door is opened)

OPTION 4

Chirp disabled – Lock confirmation if Lock button is pressed more than once

FUNCTION 3 – Arming

OPTION 1

Active arming

OPTION 2*

Passive arming – 60 seconds rearm

OPTION 3

Passive arming – 60 seconds rearm. No TWO-STAGE disarm.

OPTION 4

Active arming with disarm notification (ignition ON to OFF, door opened and then closed)

FUNCTION 4 – Ignition monitoring with Siren / Horn mode (

Available only on some models)

OPTION 1

Siren mode with ignition monitoring disabled

OPTION 2*

Siren mode with ignition monitoring enabled

OPTION 3

Horn mode with ignition monitoring disabled

OPTION 4

Horn mode with ignition monitoring enabled

FUNCTION 5 – Negative trigger

OPTION 1

Ignition and shock bypass under remote start.

OPTION 2*

Trigger alarm input

Siren / Horn Chirp Duration Adjustment
(Available only on some models)

The default horn chirp duration is 25 ms. In order to adjust the timing for the Siren, select MODE 2 –
FUNCTION 4 – OPTION 1 or 2. To adjust the timings for the Horn, select MODE 2 – FUNCTION 4 – OPTION 3
or 4. The siren/horn chirp duration can be configured by following these steps:

1.

Flash the hood pin switch (see on page 4) - the parking lights will stay on for up to 20 seconds.

2.

Within 20 sec. press and hold the valet button.

3.

Press the button to enter horn chirp duration adjustment – Siren or Horn will chirp 5 times.

4.

Proceed as follows to change the horn chirp duration:

a.

Every time you press the

button, the system will increase horn chirp duration by

3 ms. When chirp duration reaches its maximum value (250 ms the siren / horn will
sound 1 long chirp.

b.

Every time you press the button, the system will increase horn chirp duration by

10 ms. When chirp duration reaches its maximum value (250 ms) the siren / horn will
sound 1 long chirp.

c.

Every time you press the

button, the system will decrease the horn chirp duration

by 3 ms. When chirp duration reaches its minimum value (10 ms), the siren / horn will
sound 1 long chirp.

d.

Every time you press the

button, the system will decrease the horn chirp duration

by 10 ms. When chirp duration reaches its minimum value (10 ms), the siren / horn will
sound 1 long chirp.

e.

To save the settings and exit horn chirp duration adjustment, press the

+

buttons simultaneously (or the press

button on the two-way remote). The siren /

horn will sound 3 chirps. Then turn the ignition key to the OFF position.

Advertising