AEG KO-LAVAMAT 72620 - Manual (Page 22)

Operating instructions
22
Washing Program Sequence
Program Progress Display
Prior to the start, the program steps
chosen are displayed on the program
progress display. During the washing
program, the current program step is
displayed.
Multi-Display
The expected time remaining (in minutes) to
the end of the program is displayed on the
multi-display.
3 Counting down of the remaining time may be stopped or corrected by
the washing machine controller as a result of automatic adjustments to
the program (amount of washing, washing type, imbalance detection,
special rinse cycle, etc.).
Changing the Spin Speed
The spin speed can be changed or o (RINSE HOLD) set during the
washing program.
Other settings cannot be altered.
Stopping the Program
0 To stop the washing program early, turn the program selector to I
(OFF).
3 The washing program can be interrupted at any time using the O/s
(START/PAUSE) button and then continued by pressing the button
again. It is not possible to change the washing program during a pause.
(Pre-Wash)
(Main Wash)
(Rinse)
(Rinse+)
(Spin)
(End)