WEN 56035 Plate Compactor - Manual (Page 11)

7
ASSEMBLY
In order to best protect the plate compactor while in the package, this product comes with some
components disassembled. Please complete the following assembly step before proceeding to use
the plate compactor.
If after reading this section, you are unsure about how to perform any of the steps, please call
(888) 315-3080 M-F 8-5 CST for customer service.
WARNING:
This plate compactor is heavy. Some procedures may require
lifting equipment or two people.
Attach Handle
To attach the handle to the plate compactor,
perform the following steps:
1. Attach the end of the handle to the bolt
on the base (see Figure1). Then tighten
it with the lock nut.
2. Repeat it for the other side.
Figure 1