WEN 56660 9 AMP Snow Shovel Snow Wheel Installation - Manual

How to change the Snow Wheel (auger)
on a 12.5” Electric Snow Shovel (Model 56660)
Step 1: Remove the 13mm nuts from BOTH ends of the motor housing. Each nut will
have a flat washer under it. Set the washers and nuts aside for reassembly later.
Step 2: Remove the six Phillips head screws from the left cover, an oval shaped metal
plate on the left side of the motor housing as you are looking at the machine from the
operator’s position.
Step 3: Remove the belt by pinching on the tensioner.