Main menu – COSA Xentaur Xentaur XDTL-HT User Manual
Page 20
20
icon appears next to the relay status. The default user passcode is 0000 and the default administrator
passcode is 1234.
Enter user or administrator access level
Go to System
>
Login
Enter 4-digit user or administrator passcode
Enter locked mode
Go to System
>
Logout
Change user or administrator passcode
Go to System
>
Login
Enter current 4-digit passcode
Go to System
>
Password
Enter new 4-digit passcode
Main Menu
Pressing the
key from the main screen would enter the main menu. The menu items are shown
below in their order. Some items may not appear if their corresponding features are not in the
instrument configuration. Press the
key or the
key to select the submenu. Once item is
selected, press the
key to enter submenu. Pressing the
key from the main menu exits the
menu system.
Measurement
Communication
Analog Output
Relays
Display
PID
Reset Alarm
System
NOTE:
Entering user or administrator access level in the menu does not
grant same access on the Modbus communication and vice versa.