Doric Instruments 5000D Digital Process Indicator and Miniature Datalogger - Manual (Page 16)

15
Scroll through the various sensor types by pressing the Arrow
key until a “K” appears on the display. Press the ENT key to
select K type thermocouple.
STEP 3.
An F or C will appear. Pressing the Arrow key
repeatedly will cause C and F to alternate on the display.
With F on the display, select degrees F by pressing the ENT
key. DCPT will appear. The Arrow key allows you to toggle
back and forth between 0.1 and 1.0 degree resolutions.
STEP 4. T
o select 0.1
°
resolution, with 0.1 on the display
press the ENT key. At this point the display will show the
MATH menu item*. To open the MATH menu for
programming, press the ENT key. To go back to the mode,
press PGM key. In order to scroll through the various menu
items press the Arrow key.
*MATH functions are available on units with Multi-
channel option installed only through the Doric
5000 Viewer Software.
Math Function Setup
Example: View the maximum temperature value recorded.
Note: A running record is kept of the minimum, and
maximum values of temperature. Nothing is
required to initiate this recording. These values are