Doric Instruments 1000 Pro Series Digital Panel meters are suitable - Manual (Page 16)

15
Chapter 3 Alarm and Excitation Option
The alarm option enables the user to set a high and a low alarm
limit. When an alarm occurs, a red alarm LED indicator will turn
on and a normally open relay contact will close. The LED will turn
off and the relay will automatically reset when the alarm limit is no
longer exceeded. Two alarms are provided and are designated
LOW and HIGH on the front panel. Alarm limits are set by
potentiometers located behind the front panel lens.
SET HI/LO JUMPER
DP1 DP3 DP2
ZERO SCALE SPAN
COARSE
ADJ
FINE
ADJ
ALARM
LOW
LOW
ALARM
HIGH
HIGH
COARSE
ADJ
FINE
ADJ
SET HI/LO
JUMPER
SET LOW SET HIGH NORMAL