KROHNE USB ADAPTER PLUS EMF EN - Manual (Page 4)

2
OPERATION
4
USB ADAPTER PLUS
www.krohne.com 06/2014 - 4003748601 - QS USB_Adapter_Plus R03 en
As described in the previous chapter, the USB-Adapter Plus can be used in three ways. Each way
is described in a separate section.
2.1 IFC 100
The standard delivery includes all items you need to use it with an IFC 100 signal converter.
Needed software:
• GDC driver
• IFC 100 HART DTM
• Pactware configuration tool
Figure 2-1: Connection of adapter to the GDC bus of the IFC 100.
1 Connection room of IFC 100
2 Cable 2x3-pole > 2x4-pole
3 USB-Adapter Plus
INFORMATION!
All relevant tools are on the CD and on the website of the manufacturer. Connect the USB
connector to your PC, start the relevant program and follow the instructions given on the display.
Refer to the documentation of the signal converter for a description of the menu.