KROHNE IFC 300 Converter FOUNDATION FIELDBUS EN - Manual (Page 19)

OPERATION
4
19
IFC 300
www.krohne.com 02/2011 - 4001086501 - AD IFC 300 FF R02 en
AI1_DIAG
AI1 Diagnosis
R Setting:
Startup Device / RB : MODE_BLK.ACTUAL is OOS / Memory
failure / no schedule / period of execution / period of
execution to large / MODE_BLK.PERMITTED doesn't include
Auto / MODE_BLK.TARGET is set OOS / MODE_BLK.TARGET is
set MAN / MODE_BLK.ACTUAL is MAN , Startup to Auto /
CHANNEL is uninitialized / UNIT of CHANNEL selected
TB.prim_val not convertible to XD UNIT / XD_SCALE :
difference between EU_100 and EU_0 is to less / OUT_SCALE :
difference between EU_100 and EU_0 is to less / L_TYPE is
uninitialized / L_TYPE is direct , XD_SCALE is not equal
OUT_SCALE / SIMULATE_STATUS is not Good , Simulation is
active / SIMULATE_STATUS limitted , STATUS_OPTS is set ,
Simulation active / Simulation is active / Transducer Block
MODE_BLK.ACTUAL is OOS / CHANNEL selected
TB.prim_val.status is Bad / TB.prim_val.status is limitted ,
STATUS_OPTS is set / CHANNEL selected TB.prim_val.status
is Uncertain / OUT.value exceeds OUT_SCALE / unknown
reason / Ok
Current diagnosis
AI2_DIAG
AI2 Diagnosis
R For settings see AI1_DIAG Current diagnosis
AI3_DIAG
AI3 Diagnosis
R For settings see AI1_DIAG Current diagnosis
PID_DIAG
PID Diagnosis
R Setting:
Startup Device / RB : MODE_BLK.ACTUAL is OOS / Memory
failure / no schedule / period of execution / period of
execution to large / MODE_BLK.PERMITTED doesn't include
Auto / MODE_BLK.TARGET is set OOS / MODE_BLK.TARGET is
set MAN / MODE_BLK.ACTUAL is MAN , Startup to Auto /
BYPASS is uninitialized / SHED_OPT is uninitialized /
PV_SCALE : EU_100 <= EU_0 / OUT_SCALE : EU_100 <=
EU_0 / TRK_SCALE : EU_100 <= EU_0 / FF_SCALE : EU_100
<= EU_0 / unknown reason / Ok
Current diagnosis
IT1_DIAG
IT1 Diagnosis
R Setting:
Startup Device / RB : MODE_BLK.ACTUAL is OOS / Memory
failure / no schedule / period of execution / period of
execution to large / MODE_BLK.PERMITTED doesn't include
Auto / MODE_BLK.TARGET is set OOS / MODE_BLK.TARGET is
set MAN / MODE_BLK.ACTUAL is MAN , Startup to Auto /
INTEG_TYPE is uninitialized / IN_1 and IN_2 are not
connected / TIME_UNIT1 and TIME_UNIT2 are uninitialized /
CLOCK_PER <= period of execution / TIME_UNIT1 is
uninitialized / TIME_UNIT2 is uninitialized / IN_1.status is
Bad / IN_2.status is Bad / IN_1.value is NaN or INF /
IN_2.value is NaN or INF / PCT_INCL < UNCERT_LIM /
PCT_INCL < GOOD_LIM / PULSE_VAL1 and PULSE_VAL2 are
0 / TOTAL_SP is 0 : cyclic reset / unknown reason / Ok
Current diagnosis
IT2_DIAG
IT2 Diagnosis
R For settings see IT1_DIAG Current diagnosis
Parameter Parameter Parameter Parameter
Subelement Access Description and settings Initial Value
.book Page 19 Tuesday, January 18, 2011 3:40 PM