Installation – KROHNE OPTIFLEX 2200 C_F Quickstart EN User Manual

Page 21

Advertising
background image

INSTALLATION

2

21

OPTIFLEX 2200 C/F

www.krohne.com

08/2013 - 4000622103 - QS OPTIFLEX 2200 R03 en

• Attach a lock nut to the threaded rod below the process connection. Turn the nut until it is ¾

along the length of the rod.

• Attach a union nut to the threaded rod below the process connection.
• Use two 8 mm open-end wrenches to tighten the union nut against the lock nut.

Figure 2-23: How to assemble the segmented single rod probe: part 1

CAUTION!
Make sure that the nuts are tight and the rod probe cannot loosen.

Advertising