KROHNE OPTIFLEX 2200C SIL - Manual (Page 18)

7
OPERATION
18
OPTIFLEX 2200 C
www.krohne.com 01/2013 - 4000738603 - AD SIL OPTIFLEX 2200 R03 en
2.5.9 HART ADDRESS
Any HART ® address more than
0 will activate HART ®
multidrop mode.
Multidrop mode is not Multidrop mode is not Multidrop mode is not Multidrop mode is not
permitted for SIL-approved permitted for SIL-approved permitted for SIL-approved permitted for SIL-approved
devices. devices. devices. devices.
min-max:
0…15
0.
Do not change. Do not change. Do not change. Do not change.
2.8.1 INPUT TAB. The device uses the
conversion table to convert
distance or level
measurements to volume and
mass readings. The readings
are shown in normal mode.
min-max:
0…30 conversion pairs
0
1 Use only "4-20 / 3.6E" or "3.8-20.5 / 3.6E"
2 Units and range depend on the output function, length unit and volume unit selected
3 If the safety function must immediately give a result, we recommend that you do not change this value
Menu
No.
Function Function description Selection list Default value
and comments