KROHNE BATCHCONTROL 5014 C - Manual (Page 19)

Installation and operating instructions 19 BATCHCONTROL
H 3064.02 Output 4 on function definition
3064.03 On value (output 4)
I 3064.05 Output 4 off function definition
3064.06 Off value (output 4)
G – J 3091.03 Time out
There are parameters similar as in the case of the time representation, for the supervision of the
volume flow.
volume flow parameter
-0,02
-0,01
0,00
0,01
0,02
0,03
0,04
0,05
0,06
0,07
0,08
0,09
0,10
0,11
0,12
0,13
0,14
0,15
0,16
0,00 2,00 4,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00
t[s]
Q[l
/s
]
flow max. limit flow max. flow Q100%
A
B
C
‘A’ is the full scale range of the flow meter. An overload of +50% is permitted. If the flow should get
even bigger, then the value is limited to150%. The value 'B' is an emergency switch off value for
the valve. The value 'C' corresponds to the maximum volume flow during the filling process.
CAN PARAMETER
Letter Object No. Description
A 3001.01 Full scale range
B 3003.01 Maximum volume flow
C 3094.06 Maximum flow velocity
The internal volume counter adds up the measurement values. As in the case of the two previous
representations the counter has own parameters.
volume parameter
(internal counter)
0,00
0,20
0,40
0,60
0,80
1,00
1,20
0,00 2,00 4,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00
t[s]
v
o
lume
[
m
l]
A
F
G
H
I
B C D E
At the time of ‘A’ the filling starts. The bottle gets pressurized with CO2. After this both valves open
for the product at the time of 'B'. The valve reduces the flow speed at the position of 'C' and the
4