KROHNE BW 25 EN - Manual (Page 34)

6
OPERATION
34
BW25
www.krohne.com 09/2010 - 4000432302 MA BW25 R05 en
6.5 Menu indicator M10
6.5.1 Factory Settings
Menu Function Setting
1.1.1 Switching value B1 0.0
1.1.2 Hysteresis B1 0.0
1.2.1 Switching value B2 0.0
1.2.2 Hysteresis B2 0.0
1.3 Display Flow rate
1.4 Time constant 3 s
1.5.2 Reset error NO
3.1 Language DEUTSCH
3.2 Function B1 INACTIVE
3.3 Contact B1 NC contact
3.4 Function B2 INACTIVE
3.5 Contact B2 NC contact
3.9 Multidrop polling address 0
3.12 Alarm current OFF
3.13.1 Level meter see nameplate
3.15 Input code NO
INFORMATION!
The measuring device has been preset at the factory in accordance with the customer order.
Therefore subsequent configuration via the menu is only necessary if the intended use of the
device is changed.
MA_BW25_R05_en_432302_PRT.book Page 34 Tuesday, September 28, 2010 8:17 AM