Martel Electronics BetaGauge 3II - Manual (Page 146)

7-5 Doc. Cal. Mode
Accessing the Main Level
To access the Main level of the SYS mode, use the
Menu key to locate the Setup menu item Sys, then press
the corresponding function key to display the Tag
Status screen showing the first available tag. A sample
display is shown below:
NOTE: If the display does not appear as shown above,
then the instrument tags have not been loaded
(or loaded incorrectly) into the BetaGauge II.
Refer to your instrument maintenance software
manual for specific instructions on how to
download the tags to the BetaGauge II.
Tag Status Screen Description
The Tag Status screen shows specific information about
each tag present in the BetaGauge II. When you first
access the SYS mode, the screen displays Tag 1
information. You can use the up and down arrow keys
to view other tags in the system.
NOTE: The only way to access other tags in the
system is via the Tag Status screen. Once you
have proceeded to other screens in SYS mode,
Tag 1:
BG2 TAGS Tag 1
Inst. OUT: mA
Inst. IN: PSI
Status: UNCAL
Time: 00:00:00
Date: 00/00/00
Error Tol: 0.0500
Alert Tol: 999999
Next: As Found
Tag Status
Tag TP Rslt →