Aastra Telecom CT9143i - Manual (Page 12)

New Features in Release 2.3
8 RN-001029-02, Release 2.3, Rev 00
IP Phone Release Notes 2.3
Configuring LLDP-MED Using the Configuration Files
Use the following parameters to configure LLDP-MED on the IP Phones.
Parameter–
lldp
LLDP
(in Web UI)
Configuration Files aastra.cfg, <mac>.cfg
IP Phone UI Options->Administrator Menu->
Network Settings->Ethernet&VLAN->
LLDP Support
Aastra Web UI Advanced Settings->Network->
Advanced Network Settings
Description Enables or disables Link Layer Discovery Protocol for Media Endpoint
Devices (LLDP-MED) on the IP Phone.
Format Boolean
Default Value 1 (enabled)
Range 0 (disabled)
1 (enabled)
Example lldp: 0
Parameter–
lldp interval
LLDP Packet Interval
(in Web UI)
Configuration Files aastra.cfg, <mac>.cfg
Aastra Web UI Advanced Settings->Network->
Advanced Network Settings
Description The amount of time, in seconds, between the transmission of LLDP Data
Unit (LLDPDU) packets. The value of zero (0) disables this parameter.
Format Integer
Default Value 30
Range 0 to 2147483647
Example lldp interval: 60
Parameter–
use lldp elin
Use LLDP ELIN
(in Web UI)
Configuration Files aastra.cfg, <mac>.cfg
Aastra Web UI Basic Settings->Preferences->General
Description Enables or disables the use of an Emergency Location Identification Number
(ELIN) received from LLDP as a caller ID for emergency numbers.
Format Boolean
Default Value 1 (enabled)
Range 0 (disabled)
1 (enabled)
Example use lldp elin: 0