SUOMY F1 - Manual (Page 12)

ENGLISH
ASSEMBLING INSTRUCTIONS
ASSEMBLING INSTRUCTIONS 11
HOW TO ASSEMBLE THE VISOR
To ensure the good operation of the rotation system of the visor, before
proceeding to the assembling of the visor , make sure that all the parts
(pivots, components for fixing and accessories) are removed and perfectly
clean.
Put the visor on the helmet in such a way that the center 1 fits to the disc 2.
Make sure that the rubber trim A is placed on the fixing ring B. Put the fixing
ring B so that the hexagonal space fits to the part C on the helmet. Insert the
screw D without screwing it completely. Repeat the same operation on the
other side. Adjust the screws of fixing D of the pivot so that the visor can move
freely.
The presence of deep scratches on the surface of the visor can cause strange
reflex of light that decrease the safety while driving. Replace the visor in such
a case.
1
2
A B
C
D
E