Dwyer 4C - Manual (Page 14)

Page 14
Heat/Cool Selection. Assigns output 1 to be either heat or
cool.
HEAt = Output 1 = Heating
CooL = Output 1 = Cooling
Alarm 1 Setting. Sets operation for Alarm 1. Please see
selection on Alarm Outputs for description of the outputs.
Alarm 2 Setting. Sets operation for Alarm 2. Please see
selection on Alarm Outputs for description of the outputs.
Communications Write Function Feature. Allows parameters
to be changed via the RS-485 communications. Setting to
oFF prevents any changes from remote users.
Controller Address: Set from 1 to 247. This value must match
the controller address used by the host computer.
Baud Rate Setting. This value must match the
communication baud rate of the host computer.
Communication Data Length. Choose either 7 or 8. This
value must match the communication data length of the host
computer.
Communication Parity Bit. Set this value to even, odd, or
none. This value must match the communication parity bit of
the host computer.
Communication Stop Bit. Set this value to 1 or 2. This value
must match the communication stop bit of the host computer.
ALA1
ALA2
CoSH
C-no
bP5
LEn
PrtY
StoP
S-HC