Dwyer DLI-T - Manual (Page 15)

Page 14
Dwyer DLI-T
5.5.i.b Display Confi guration
By selecting “MORE” (either by pressing the F4 key on the Adjust Visibility
Screen or by pressing the OK button) in the Display section the Display
Confi guration screen can be viewed. Here LCD screen contrast values can
be set as well as the size the channels are displayed on the Main Screen.
Contrast
To change the LCD screen contrast view while viewing the Display
Confi guration screen, fi rst select the contrast confi guration parameter
by pressing the F1 key. This action will highlight the function tab
corresponding to the F1 key. Once this tab is highlighted the contrast
can be increased or decreased using the UP and DOWN keys.
Size
To change the size that each channel is displayed on the Main Screen
view while viewing the Display Confi guration screen, fi rst select the
size confi guration parameter by pressing the F2 key. This action will
highlight the function tab corresponding to the F2 key. Once this tab
is highlighted the size can be increased or decreased using the UP
and DOWN keys. Sizes are as follows:
Small: Both channels can be displayed and appear much smaller
than the available screen space.
Medium: Both channels can be displayed and take up two-thirds of
available screen space.
Large: Both channels can be displayed and take up entire available
screen
space.
5.5.ii Power
The Power section displays information regarding battery and external power
sources as well as giving options including display and backlight status that
could potentially save power and LED status options.
5.5.ii.a Power Modes
The power modes screen displays information regarding the display,
backlight, and LED mode as well as the options to change their function.
Display
The DLI-T’s LCD screen has options to be either on continuously or
turn off automatically after 5 minutes of inactivity. This option can