Dwyer DLI User Manual
Page 101
101 |
P a g e
i. Add/Modify – allows the user to add the created alarm to the alarm list. To save the alarm
settings, click "OK" to save the settings and close the "Wireless Alarm Settings" window and return
to "Wireless Alarm Setup" window.
•
In the "Wireless Alarm Setup" window the data grid will show the added alarms. Click the
"Save and Exit" button to save the settings and close the "Wireless Alarm Setup" window. If the user
clicks the "Cancel" button, the window will close without saving settings/changes.
•
In the "Wireless Alarm Setup" window, highlight an alarm in the data grid and this will enable
the "Delete" button. Use the "Delete" button to delete an alarm. Click the "Save and Exit" button to
save the changes or click "Cancel" to ignore the changes.
•
In "Wireless Alarm Setup" window, if there are entries in the data grid, then the feature
"Notifying no reading received for a period of TIME" will be enabled. This feature allows the user to
be notified if no wireless data has been received for a period of TIME either in terms of Screen
Alarm or Email Alarm (as checked in the "Wireless Alarm Settings" window).
•
The "Save Setup to File" button will become enabled when there is one or more alarm set up
and shown in the grid. Click "Save Setup to File" and enter a file name to save all the alarms in the
grid to the XML file.