Dwyer Mark User Manual
Page 27
26
MAINTENANCE AND REPAIR
The moving parts of these units need no maintenance or lubrication. Some parts are replaceable by qualified
personnel, contact the factory for details.
Proximity Controls
Attn: Repair Department
1431 State Highway 210E
Fergus Falls, MN 56537
LIMITED WARRANTY
Limited Warranty: The Seller warrants all Dwyer instruments and equipment to be free from defects in workmanship
or material under normal use and service for a period of one year from date of shipment. Liability under this warranty is
limited to repair or replacement EXW Ex Works Dwyer Instruments, Inc of any parts which prove to be defective within
that time or repayment of the purchase price at the Seller’s option provided the instruments have been returned, trans-
portation prepaid, within one year from date of purchase. All technical advice, recommendations and services are based
on technical data and information which the Seller believes to be reliable and are intended for use by persons having
skill and knowledge of the business, at their own discretion. In no case is Seller liable beyond replacement of equipment
EXW Ex Works Dwyer Instruments, Inc or the full purchase price. This warranty does not apply if the maximum ratings
label is removed or if the instrument or equipment is abused, altered, used at ratings above the maximum specified, or
otherwise misused in any way.
THIS EXPRESS LIMITED WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER REPRESENTATIONS MADE BY
ADVERTISEMENTS OR BY AGENTS AND ALL OTHER WARRANTIES, BOTH EXPRESS AND IMPLIED. THERE ARE
NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE FOR
GOODS COVERED HEREUNDER.
BUYER’S REMEDIES
The buyer’s exclusive and sole remedy on account of or in respect to the furnishing of non-conforming or defective
material shall be to secure replacement thereof as aforesaid. The Seller shall not in any event be liable for the cost of
any labor expended on any such material or from any special, direct, indirect, consequential or incidental damages to
anyone by reason of the fact that it shall have been non-conforming or defective.
Substitution of components may impair intrinsic safety of models with IS suffix. Use a damp cloth
with soap and water for cleaning and decontamination. Solvents may damage O-ring seals. Units in
need of repair should be returned to the following address, freight prepaid. Be sure to include a brief explanation of the
problem and any relevant application information.
WARNING