Milestone Smart Client 3.6 - Manual (Page 80)

Milestone XProtect Smart Client 3.6; User’s Manual
Or all events on a particular server:
2. Click the Get List button. This will display a list of detected events. You are able to click the
listed events to view recordings from the required event in the view.
Tip: To view what took place prior to and after the event, use the Time Navigation
controls to browse recordings from around the time of the event.
Smart Search
Smart search lets you search for motion in one or more
selected areas of images from a particular camera.
Note: Smart search is only available when connecting to
selected surveillance systems; see Surveillance System
Differences on page 100 for more information. Smart
search cannot be used for images from fisheye cameras.
Depending on your user rights, access to smart search
may be restricted.
To use smart search, do the following:
1. Select the Browse tab’s Smart Search section.
2. Select the Smart Search section’s Show Grid check
box.
3. Select the required camera in the view. A blue grid overlay will appear on the image from
the camera. This is the grid you selected in the previous step; the grid can be removed by
clearing the Show Grid check box.
Tip: For a better view, enlarge the camera image by
double-clicking the blue bar above the image.
Click and drag inside the image to select the area(s) in
which you want to perform the smart search. You are able
to select more than one area.
The areas you select will become visible through the blue
overlay. The blue overlay thus indicates areas to be excluded from the smart search. With
www.milestonesys.com Page 80 Viewing Recorded Video