ADC Release 3.1 - Manual (Page 264)

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-244
© 2000, ADC Telecommunications, Inc.
DLP-753
Page 4 of 4
Table 753-2. ATM Interface Configuration Options, Continued
SELECTION DEFAULT OPTIONS DEFINITIONS
Interface Type UNI UNI
NNI Specifies interface type as User to Network
Interface or Network to Network Interface.
CAC Formula PCR PCR
SCR Specifies Peak Cell Rate or Sustained Cell Rate
for Connection Admission Control calculations.
Policing Off On or Off User sets whether traffic will be policed for
Quality Of Service (QOS).
Cell Scrambling Off On or Off User sets whether traffic will be scrambled.
Over Subscription Rate 100 User sets depending on traffic contract.
Max Active VPI/VCI
Bits 0 0-12 Sets maximum number of bits allowed to select
VCs from.
Max number of VPCs 1 1 to 2048 Sets the maximum number of VPCs that may be
utilized from this port.
Max number of VCCs 0 0 to 8192 Sets the maximum number of VCCs that may be
utilized from this port.
Cellworx Vision: ATM Interface
Apply Card View Refresh Close
X
Node Name: Cellworx1
Node Id: 1
Location: 5th Street
Slot Number: 9
Card : T3 CRS
Port Number: 1
Interface Name: Slot9_Port1 DS3
Loopback Location Code:
Recording Interface ID:
1111111111111111
0000000000000000
Provisioned Endpoints:
Number of VPCs: 0
Number of VCCs: 0
Interface Type: CAC Formula:
UNI
NNI
PCR Based
SCR Based
Policing
Cell Scrambling
Over Subscription Rate (%): (100-10 100
VP/VC Allocation:
Max Active VPI Bits:
0
0 1 2 3 4 5 6 7 8
Max Active VCI Bits:
0
Max Number of VPCs:
Max Number of VCCs:
(1-2048)
(0-256)
Error Log:
9 10 1
0
2048
0
13432-A
Figure 753-2. T3 CRS ATM Interface Screen