Brother QL-700 - Manual (Page 21)

Name Specify the page number in ”cut every * labels” (QL-560/570/580N/700/1050/1060N)
Syntax ESC + i + A + {n1}
1B H + 69 H + 41 H + {n1}
Description When “auto cut” is specified, you can specify page number (1-255) in “cut each *
labels”.
Page number = n1 (1- 255)
Default is 1 (cut each label)
Name Set expanded mode (QL-560/570/580N/650TD/700/1050/1060N)
Syntax ESC + i + K + {n}
1B H + 69 H + 4B H + {n}
Description Definition of {n}
The meaning of each bit in a 1-byte parameter is described below.
７ ６ ５ ４ ３ ２ １ ０
Not used
Not used
Not used
Cut at end (Earlier version of
QL-650TD firmware is not
supported.)
Not used
High resolution printing
(QL-570/580N/700)
Not used
Bit 3 Cut at end
Specify that whether cut at end or not when plural pages printing
ON: Cut at end (default)
OFF: Not cut at end
Bit 6 High resolution printing (QL-570/580N/700)
ON: It prints at 600 dpi in the paper length direction.
OFF: It prints at 300 dpi in the paper length direction.（default）
Brother QL-500/550/560/570/580N/650TD/700/1050/1060N Command Reference
20