Brother TD-4100N - Manual (Page 93)

ESC i C Specify cutting
[ASCII] ESC i C n
[Decimal] 27 105 67 n
[Hexadecimal] 1B 69 43 n
[Parameters] n=0,1 or 48,49
[Description]
・ Specifies the cutting after printing.
・ When n = 1 or 49 ("1"), cutting is specified.
・ When n = 0 or 48 ("0"), cutting is cancelled.
・ The default auto cut setting can be changed with the P-touch Template Settings Tool
(P-touch Template Settings.exe).
・ The number of auto cut copies can be specified with the P-touch Template Settings Tool
(P-touch Template Settings.exe).
93
・ Manufacturer’s default auto cut setting ON (auto cut)
Manufacturer’s default auto cut copies 1