Brother MFC-7340 - Manual (Page 12)

Setting Up the Machine
10
STEP 1
10 Tone and pulse dialing mode
(Canada only)
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
1
Press Menu.
2
Press 0.
3
Press 4.
4
Press or to select Pulse (or Tone).
Press OK.
5
Press Stop/Exit.
11 Dial Prefix
The dial prefix setting will automatically dial a
predefined number before every fax number you dial.
For example: If your phone system requires a 9 to dial
an outside number this setting will automatically dial 9
for every fax you send.
1
Press Menu.
2
Press 0.
3
Press 5 (For Canada, press 6).
4
Enter the prefix number (up to 5 digits) on the
dial pad, and then press OK.
Note
• You can use the number 0 to 9 , # , l and !. (Press
Hook to display “!“.)
You cannot use ! with any other numbers or
characters.
If your telephone system requires a timed break
recall (hookflash), press Hook to enter the break.
• If the pulse dialing mode is on, # and * are not
available to use. (Canada only)
5
Press Stop/Exit.