Setup send, Before you begin, Using the adf (automatic document feeder) – Brother MFC-3100C User Manual
Page 67
S E T U P S E N D
7 - 1
7
BHLMFC-US-MFC3100C-FM5.5
7
Setup Send
Before You Begin
Before you begin sending faxes, please be sure to read all the instructions and
cautions listed below for placing originals in the automatic document feeder.
Using the ADF (Automatic Document Feeder)
■
Documents must be between 3.5 and 8.5 inches wide and 5 and 14 inches long.
■
Make sure you place originals face down, top edge first.
■
Adjust the paper guides to fit the width of your document.
■
The automatic document feeder (ADF) can hold up to 20 pages, feeding each
one individually through the MFC. Use standard (20 lb/75g/m
2
) paper when
using the ADF.
Fan the paper, and then stagger the pages in the ADF as shown:
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples,
paper clips, paste or tape attached. DO NOT use cardboard, newspaper or
fabric.
Make sure documents written with ink are completely dry.
Originals are Face
Down in the ADF
Paper Guides
Approx. 1/2 inch