Brother MFC-7820N - Manual (Page 103)

Using your machine with a Macintosh ®
7 - 26
7
DEVICE SETTINGS (not available for DCP-7020)
You can configure the machine settings.
■ Remote Setup — enables you to open the Remote Setup Program. (See MFC Remote Setup (Mac OS ®
X 10.2.4 or greater) (not available for DCP-7020) on page 7-36.)
■
Quick-Dial — enables you to open the Set Quick-Dial window of the Remote Setup. (See MFC Remote
Setup (Mac OS
® X 10.2.4 or greater) (not available for DCP-7020) on page 7-36.)
Note
When the machine is connected to a network, you cannot use these functions.
SCAN
This section contains four buttons for Scan to Image, Scan
to OCR, Scan to E-mail and Scan to File applications.
These four selections can be accessed from
ControlCenter2.0 or from the Scan key on the control panel
of the machine. The Target Application, File Type and scan
settings are configured independently by choosing the
Software Button or Device Button tabs of the
ControlCenter2.0 Configuration window.
Image (example: Apple PreView)
Scan to Image feature allows you to scan an image directly
into your graphics application for image editing. To change
the default settings, click on the button while holding down the
Ctrl key and select Software Button or Device Button.