Brother MFC-665CW - Manual (Page 21)

Installing the Driver & Software
19
Windows
®
W
ind
ows
®
Wi
rel
ess
Ne
tw
o
rk
10
Press a or b to choose TKIP or AES for
Encryption Type
and press OK.
Enter the WPA/WPA2-PSK password you
wrote down in step
1 using the dial pad to
choose each letter or number. You can use the
and keys to move the cursor left and
right. For example, to enter the letter a, press
the 2 key on the dial pad once. To enter the
number 3, press the 3 key on the dial pad
seven times.
The letters appear in this order: lower case,
upper case, numbers and then special letters.
(For more information, see Entering
Text on page 25.)
Press OK when you have entered all the
characters, then press 1 for Yes to apply your
settings. Go to step
11.
11
Your machine will now try to connect to your
wireless network using the information you
have entered. If successful, Connected will
appear briefly on the LCD.
If your machine does not successfully connect
to your network, you should repeat steps
4 to
10 to make sure you have entered the correct
information.
The machine will automatically acquire the
correct TCP/IP address information from your
access point (router) if DHCP is enabled
(DHCP is normally enabled as default for most
access point routers).
If your access point does not have DHCP
enabled you will need to manually configure
the IP address, subnet mask and gateway of
the machine to suit your network. See the
Network User’s Guide for details.
Wireless setup is now complete. A four
level indicator on the bottom of your
machine’s LCD will show the wireless
signal strength of your access point or
router. To install the MFL-Pro Software
suite, continue to step
12.
12
Turn on your computer.
You must be logged on with Administrator
rights.
Close any applications running before installing
the MFL-Pro Suite.
Note
Before installation, if you are using personal
firewall software, disable it.
13
Put the supplied CD-ROM into your CD-ROM
drive. If the model name screen appears,
choose your machine. If the language screen
appears, choose your language.
14
The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
If this window does not appear, use Windows
®
Explorer to run the start.exe program from the
root folder of the Brother CD-ROM.
Note
When the User Account Control screen appears,
click Allow.
15
Choose Wireless Network Connection, and
then click Next.
16
Click on Checked and confirmed check box,
and then click Next.