Canon EOS 1200D - Manual (Page 9)

8
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
With EU version 2.13 or earlier, WFT pairing software was used when
connecting a camera and a computer. However, with EU version 2.14 or
later, Wi-Fi/LAN connection pairing function of EU is used for
connection.
Establish a connection following the procedures on Wireless File
Transmitter Instruction Manual, and Wi-Fi Function Instruction Manual
or Wired LAN Instruction Manual supplied with the camera. Note the
difference between connection procedures for EU version 2.14 or later
and those for EU version 2.13 or earlier as shown below.
 Starting up WFT pairing software
(EU version 2.13 or earlier)
Starting up WFT pairing software is required.
(EU version 2.14 or later)
While starting up WFT pairing software is not necessary, starting up
EU is required.
 When a camera is detected
(EU version 2.13 or earlier)
When a camera is detected and a message is displayed, double-click
the WFT pairing software icon.
(EU version 2.14 or later)
When a camera is detected and a message is displayed, click the
message.
LAN Connection with EU
Before starting the procedure to establish a LAN connection, make sure
to perform the following confirmation.
1 Start up EU before connecting the camera and the
computer.
 The following window appears.
2 Click the [Pairing over Wi-Fi/LAN] button. When a
message [To connect to the camera via LAN, some
Windows Firewall settings must be changed. Do you
want to make these changes?] appears, select [Yes].
COP
Y