Canon PIXMA Pro9000 Mark II - Manual (Page 12)

0
6 1 2 3
4
5
4
D
B
C
E
5 6
Close the Top Cover (B).
Wait for about 3 minutes until the POWER lamp (green) (C) stops flashing and
stays lit then operating noise stops, and go to the next step.
Do not open the Top Cover while the lamp is flashing.
•
Make sure the Inner Cover (D) is closed. •
Install all the other ink tanks in the same way.
Install all the ink tanks.
Make sure all the
Ink lamps light red.
Match the labels when installing. •
Once you have installed the ink tanks, do not remove them unnecessarily. •
If an Alarm lamp (E) flashes orange, make sure that the Print Head and the ink tanks are
correctly installed.
•