HP Matrix Operating Environment Software - Manual (Page 60)

Figure 42 Delete label of HPVM DIO
To set or delete the label of DIOs:
1. Select Show HPVM DIO Resources. The HPVM table appears.
2. Select the check boxes of preferred DIOs to change the labels. This enables the Change Label
button.
3. Click Change Label to open the Change labels for the selected DIOs page. This page displays
the following options:
Depending on the option you select, the page displays the data.
4. Select one of the two options.
If you select Delete, the labels of the selected DIOs are deleted.
If you select set, the DIO table is displayed, and you can enter new labels in the New Label
field to set new label for the DIO. You can modify labels of more than one DIO at the same
time.
5. Click OK. The DIO label is deleted or set depending on the option selected.
VM or vPar Properties view
You can access the VM or vPar Properties view from any other Integrity Virtual Server Manager
views that include a link to a VM or vPar, such as the VSP General tab, the VSP Virtual Servers
tab, or any Network or Storage tab. You can also access the VM or vPar Properties view by
selecting View
→VM or vPar Properties... (a VM or vPar must be selected in the current view).
Figure 43 shows a portion of a typical VM or vPar Properties view. Tabs available from the view
are described in the text that follows. Subsequent sections describe each tab in more detail.
60 Using Integrity Virtual Server Manager views and tabs