HP ProLiant DL320e Gen8 Server - Manual (Page 52)

1. In the Maintenance window, click iLO.
The iLO Configuration Utility window appears.
2. Click Summary. The following information is displayed:
•
iLO Hostname—The DNS name of the iLO subsystem, for example, ilo instead of
ilo.example.com
. This name can be used only if DHCP and DNS are configured to connect
to the iLO subsystem name instead of the IP address.
•
iLO Firmware Version—The version of the installed iLO firmware
•
iLO IP Address—The network IP address of the iLO subsystem
•
Server Model—The type of system in which this iLO processor is integrated
•
System ROM—The family and version of the active system ROM
You can also view this information on the iLO Network—IP & NIC Settings and Overview screens
in the iLO web interface. For more information, see the HP iLO 4 User Guide on the HP website
(
http://www.hp.com/go/ilo/docs ).
NOTE: The rest of the procedures in this section are written with the assumption that you have
selected iLO from the Maintenance window.
Editing iLO Access Settings
Access Settings–Access Options
NOTE: The iLO functionality cannot be disabled on server blades.
The 38400 speed is not currently supported by the system ROM RBSU.
•
Idle Connection Timeout (minutes)—This setting specifies how long a user can be inactive, in
minutes, before the iLO web interface and Remote Console session end automatically. The
following settings are valid: 15, 30 (default), 60, or 120 minutes, or Infinite. Inactive users
are not logged out when this option is set to Infinite. Failure to log out of iLO by either browsing
52 Using Intelligent Provisioning