Threshold alert log, Figure 57 threshold alert log, Open trunking log – HP StorageWorks 2.32 Edge Switch User Manual
Page 127: 57 threshold alert log
Edge Switch Element Manager user guide 127
Threshold alert log
This log provides details of threshold alert notifications. Besides the date and time that the alert
occurred, the log also displays details about the alert, as configured through the Threshold
Alerts option under the Configure menu. To open the Threshold alert log, select Logs >
Threshold Alert Log.
Figure 57
Threshold Alert Log
•
Date/Time—Date and time stamp for when the alert occurred.
•
Name—Name for the alert, as configured through the Configure Threshold Alerts dialog box.
•
Port—Port number where the alert occurred.
•
Type—The type of alert: transmit (Tx) or receive (Rx).
•
Utilization—Percent usage of traffic capacity. This is the percent of the port’s throughput
capacity achieved by the measured throughput. This setting constitutes the threshold value and
is configured through the Configure Threshold Alerts dialog box. For example, a value of 25
means that threshold occurs when throughput reaches 25% of the port’s capacity.
•
Interval—The time interval during which the throughput is measured and an alert can
generate. This is set through the Configure Threshold Alerts dialog box.
Open Trunking log
The Open Trunking log displays only if the optional Open Trunking feature is installed. For details,
see”