HP EliteBook 8740w Mobile Workstation - Manual (Page 88)

To install a hard drive in the upgrade bay:
1. Insert the hard drive into the upgrade bay.
2. Tighten the upgrade bay screw.
3. Replace the battery.
4. Turn the computer right-side up, and then reconnect external power and external devices.
5. Turn on the computer.
Replacing an optical drive
CAUTION: To prevent information loss or an unresponsive system:
Shut down the computer before removing the optical drive from the upgrade bay. Do not remove the
optical drive while the computer is on, in Standby, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
76 Chapter 6 Drives