Enhanced snmp configuration – HP Insight Management-Software User Manual
Page 34
Figure 3-5 Enhanced SNMP configuration
Do not configure the VC Domain using the enhanced SNMP configuration. If necessary, disable
the enhanced SNMP configuration by following these steps:
1.
Do not configure more than five SNMP trap destinations.
2.
Verify that all SNMP trap destinations follow these rules:
a.
The Destination Name must be in the following format:
<IP Address of the SNMP Trap Destination>_<Community
String>_<0 for VC-Enet and 1 for VC-FC>
(for example, 192.168.1.1_public_1)
b.
Select the “ipv4” option.
c.
Set the SNMP trap format to “SNMPv1.”
Figure 3-6 Adding or editing a compatible SNMP trap destination
d.
To disable trap severities, from the Add a SNMP Trap Destination page, click
Advanced
, as shown in the following figure.
34
Managing VC Domains