HP ProLiant SL165z G7 Server - Manual (Page 6)

Operations 6
Operations
Power up the server
To power up the server, press the Power On button.
Power down the server
WARNING: To reduce the risk of personal injury, electric shock, or damage to the
equipment, remove the power cord to remove power from the server. The front panel Power
On button does not completely shut off system power. Portions of the power supply and some
internal circuitry remain active until AC power is removed.
IMPORTANT: If installing a hot-plug device, it is not necessary to power down the server.
1. Shut down the operating system as directed by the operating system documentation.
2. Press the Power On button to place the server in standby mode. When the server activates standby
power mode, the system power LED changes from green to off.
3. Disconnect the power cords.
The system is now without power.
Remove the access panel
CAUTION: Do not operate the server for long periods with the access panel open or
removed. Operating the server in this manner results in improper airflow and improper
cooling that can lead to thermal damage.
1. Power down the server (on page 6 ).
2. Remove the server from the rack.
3. Remove the access panel.
For server-specific instructions, see the server installation sheet included with the server.