HP StorageWorks XP Remote Web Console Software - Manual (Page 91)

Figure 50 Sample Spreadsheet
All of the formatting requirements in “Spreadsheet File Formatting Requirements” (page 91) must
be satisfied.
Table 10 Spreadsheet File Formatting Requirements
Requirements Item
Text file File type
Extension must be .spd.
Maximum number of letters for the file name is 32 including the extension.
The following symbols cannot be used for the file name:
\ / : , ; * ? “ < > | and space.
File path must be under 255 letters.
File name
400,000 rows Maximum number of rows in
a spreadsheet
Linefeed code must be put in the end of each row. End-of-line character
Maximum number of letters in a row is 200 bytes, including the linefeed
code at the end. Maximum number of letters in
a row
Settings are not case-sensitive, except for WWN and host group. Case-sensitivity
The following parameters should be written in one or two-digit hexadecimal
numbers:
Host group ID, host mode, LDKC, CU, LDEV.
The parameter for LUN should be written in up to four-digit hexadecimal
numbers.
Tab codes and a series of spaces before or after comma are ignored.
Format (for more information
on the required format, see
“LUN Manager Spreadsheet
Settings” (page 95)
)
Spreadsheet Components
The spreadsheet consists of the following components:
•
Spreadsheet Declaration (see “Spreadsheet Declaration” (page 92) )
•
Function tags (see “Function Tags” (page 92) )
•
Configuration definitions (see “Configuration Definitions” (page 93) )
•
Comments (see “Comments” (page 95) )
Spreadsheet Components 91