HP Pavilion t338d Desktop PC - Manual (Page 58)

50 user’s guide
about the 7-in-1 memory card reader
Digital cameras and other digital imaging devices use memory cards, or media,
to store digital picture files. The optional 7-In-1 memory card reader (select
models only) can read and can write to six types of memory cards and the IBM
Microdrive disk drive.
The card reader is accessible on the front of the PC or located inside the front
cover of the PC. It has two or four horizontal card slots which accept the
memory cards and the microdrive disk drive.
Card 4-slot Reader 2-slot Reader
CompactFlash ™ type I media Lower left slot Upper slot
CompactFlash type II media Lower left slot Upper slot
IBM Microdrive disk drive Lower left slot Upper slot
Secure Digital (SD) Memory Card Upper right slot Lower slot
MultiMediaCard (MMC) Upper right slot Lower slot
Memory Stick ® (MS) Memory Card Lower right slot Lower slot
SmartMedia ™ (SM) Memory Card Upper left slot Lower slot
You can place media in one or more of the card slots and use each media
independently. Place only one piece of media in a slot at one time.
Each card slot has its own drive letter and icon. When you insert media, the
display label may change to the title of the media, if the title is present.
special note about the safely remove hardware utility
CAUTION: Do not click Stop in the Safely Remove Hardware
window with the USB Mass Storage Device selected. Doing so
removes the operating system recognition of the 7-In-1 memory
card reader from your PC; you must restart the PC to see your
memory card reader again.
If you open the Safely Remove Hardware window by mistake, click Close.