Syslog configuration cli commands – Avaya P334T-ML User Manual
Page 87
Chapter 10 Switch Configuration
Avaya P334T-ML User’s Guide
71
Syslog Configuration CLI Commands
Use the CLI commands briefly described below for configuring System Logging.
The rules of syntax and output examples are all set out in detail in the Reference
Guide.
In order to...
Use the following command...
Enable or disable logging for the
current session
set logging session {enable |
disable}
Define a filter rule for logging
messages for the current session
set logging session condition
Display the logging configuration
for the current session
show logging session condition
Define the IP addresses of the
Syslog servers
set logging server
Delete a Syslog server from the
Syslog server table
clear logging server
Enable or disable logging for a
Syslog server
set logging server {enable | disable}
Define a filter rule for logging
messages for a Syslog server
set logging server condition
Update the server facility
parameter of a configured Syslog
server
set logging server facility
Defines the access level associated
with a Syslog server sink.
set logging server access-level
Display the logging configuration
for the specified Syslog server or for
all servers
show logging server condition
Enable or disable logging to a file
on NVRAM
set logging file {enable | disable}
Define a filter rule for logging
messages to a file
set logging file condition
Display the logging configuration
for the file sink.
show logging file condition