HP Designjet T7100 Printer series - Manual (Page 94)

Change the treatment of overlapping lines
NOTE: This topic applies only when printing an HP-GL/2 job.
The merge option controls the overlapping lines in an image. There are two settings:
● Off: where the lines cross, only the color of the top line is printed. This is the default setting.
● On: where the lines cross, the colors of the two lines merge.
To turn merge on, go to the front panel and select the Setup menu icon , then Printing
preferences > HP-GL/2 options > Enable merge. You can set the merge option from your
software in some applications. Settings in your software override the front-panel settings.
Print crop lines
Crop lines indicate where the paper should be cut to reduce it to your selected page size. You can print
crop lines automatically with individual jobs in the following ways:
● In the Windows driver dialog: select the Features tab, then Enable crop lines.
● In the Mac OS Print dialog: go to the Finishing panel and select Enable crop lines.
● On the Embedded Web Server's Submit Job page: select Advanced settings > Roll
options > Enable crop lines.
●
Using the front panel: select the Setup menu icon , then Printing preferences >
Paper options > Enable crop lines > On.
To print crop lines with nested jobs (see Nest jobs to save paper on page 89 ), you must select a
different option:
● In the Embedded Web Server: select Job management > Use crop lines when nest
is enabled > On.
●
Using the front panel: select the Setup menu icon , then Job management > Nest
options > Enable crop lines > On.
Rotate an image
By default, images are printed with their shorter sides parallel to the leading edge of the paper, like
this:
86 Chapter 8 Print options ENWW
Pri
nt opti
ons