HP XP RAID Manager Software - Manual (Page 60)

Cause of error RAID Manager command SSB2
For more information about using Auto LUN V2, contact HP Technical Support.
The command ends abnormally because you specified an Auto LUN V2 target
volume as the SS P-VOL. All commands 9758
For more information about using Auto LUN V2, contact HP Technical Support.
The command ends abnormally because you specified an Auto LUN V2 reserved
volume as the SS P-VOL. All commands 9759
For more information about using Auto LUN V2, contact HP Technical Support.
The command ends abnormally because you specified an BC/SS P-VOL as the
SS S-VOL. All commands 975a
The command ends abnormally because you specified an BC/SS S-VOL as the
SS S-VOL. All commands 975b
The command ends abnormally because you specified an BC/SS reserved volume
as the SS S-VOL. All commands 975c
The command ends abnormally because you specified an Auto LUN V2 source
volume as the SS S-VOL. All commands 975d
For more information about using Auto LUN V2, contact HP Technical Support.
The command ends abnormally because you specified an Auto LUN V2 target
volume as the SS S-VOL. All commands 975e
For more information about using Auto LUN V2, contact HP Technical Support.
The command ends abnormally because you specified an Auto LUN V2 reserved
volume as the SS S-VOL. All commands 975f
For more information about using Auto LUN V2, contact HP Technical Support.
The pair cannot be created for one of the following reasons: paircreate 9763
•
The shared memory is not increased.
• Initialization is in process.
You specified an unavailable parameter (unsupported parameter) in the
command. paircreate 976a
SS data cannot be stored because you ran the command when the pair status
was “PSUE”. pairsplit 976c
SS data cannot be stored because the SS P-VOL and Cnt Ac-S S-VOL share the
volume, and the status of the Cnt Ac-S pair is COPY. pairsplit 976e
SS data cannot be stored because the SS P-VOL and Cnt Ac-J S-VOL share the
volume, the status of the Cnt Ac-J pair is COPY. pairsplit 976f
You cannot create the pair because you specified a Cnt Ac-J delta
resynchronization pair volume as the SS P-VOL. paircreate 9771
You cannot create the pair because you specified a Cnt Ac-J delta
resynchronization pair volume as the SS S-VOL. paircreate 9772
You cannot create the pair because the SS P-VOL and BC/SS P-VOL share the
volume, and the BC/SS pair is using the MU number (SS ID) you specified for
the SS pair. paircreate 9774
You cannot create the pair because the SS P-VOL and BC/SS P-VOL share the
volume, and the BC/SS P-VOL you specified for the SS P-VOL has consistency
group settings. paircreate 9776
You cannot create the pair because the SS P-VOL and BC/SS S-VOL share the
volume, and you specified MU number zero (0) for the SS P-VOL. paircreate 9777
60 Business Copy/Snapshot troubleshooting