2 installation and discovery – HP OneView for Red Hat Enterprise Virtualization User Manual
Page 9
![background image](/manuals/398106/9/background.png)
2 Installation and discovery
Prerequisites for installing HP Insight Control for RHEV
The following are prerequisites for installing HP Insight Control for RHEV:
•
RHEV-M must be installed and configured. Refer to Red Hat's documentation for installation
and configuration of RHEV-M.
•
The RHEV-M credentials used during configuration of RHEV-M will be needed.
•
The postgres password used during configuration of RHEV-M will be needed.
•
The RHEV-M reports package must be installed in order for the reporting functionality in HP
Insight Control for RHEV to be installed and available.
Installing and configuring HP Insight Control for RHEV
You must ensure that HP Insight Control for RHEV is installed on the (RHEV-M) management console.
To install HP Insight Control for RHEV:
1.
Unpack and install the HP Insight Control for RHEV packages:
[root@rhevm ~]# tar zxf hp-icrhev-x.x.x.x.tar.gz
[root@rhevm ~]# rpm -ivh hpcs-x.x.x.x-1.x86_64.rpm
hpicrhev-x.x.x.x-1.x86_64.rpm
Installing and configuring HP Insight Control for RHEV
9