HP Compaq Mini 110c-1040DX PC - Manual (Page 54)

Managing a power-on password
To set, change, or delete this password, follow these steps:
1. Open the Setup Utility by turning on or restarting the device, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select Security > Set Power-On Password, and then press enter .
● To set a power-on password, type your password in the Enter New Password and Confirm
New Password fields, and then press
enter .
● To change a power-on password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press
enter .
● To delete a power-on password, type your current password in the Enter Current
Password field, and then press
enter 4 times.
3. To save your changes and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes.
Your changes go into effect when the device restarts.
Entering a power-on password
At the Enter Password prompt, type your password, and then press enter . After 3 unsuccessful attempts
to enter the password, you must restart the device and try again.
46 Chapter 5 Security