HP StoreEasy 1000 Storage - Manual (Page 60)

Accessing properties for HP Storage System volumes
ASM provides properties information for any volume on a logical disk on your HP Storage System.
1. In the Actions pane, select Storage View.
2. Do one of the following:
• Select any Volume (Vol) area in the content pane and then click Properties in the Actions
pane.
• Right-click any Volume (Vol) area in the content pane and select Properties.
Accessing properties for HP Storage System logical disks
ASM provides properties information for the logical disks created on your HP Storage System by
ASM.
1. In the Actions pane, select Storage View.
2. Do one of the following:
• Select any logical disk in the content pane and then click Properties in the Actions pane.
• Right-click any logical disk in the content pane and select Properties.
Properties window
ASM provides properties information for any logical disks and for any logical disk created on your
HP Storage System.
General tab—Based on the application opened, logical disks or volumes, it will list the operating
status for that application only.
Table 25 Operating status: General tab
Value Status indicator
The storage is online. No alerts. OK
See the Alerts list for more information. Warning
See the Alerts list for more information. Critical
Storage tab—Displays the unallocated space, used space, free space on the volume, and also details
on your volume or logical disk properties, depending on the application open:
Table 26 Storage tab: HP Storage System logical disk properties
Value Property
Name the system uses to identify the logical disk. System Name
Globally unique identifier(s) of the hard drive(s) used by the logical disk
for storage.
Physical Disks
Indicates if the logical disk is configured with exclusive storage. See Table
5 on page 25 for more information.
Exclusive Storage
The RAID level to which the logical disk is configured. See Customizing
RAID levels on page 27 for more information.
RAID Level
Monitoring storage 60