Replacing the service door, Replacing or upgrading the hard drive – HP EliteBook 725 G2 Notebook PC User Manual

Page 67

Advertising

Replacing the service door

Replace the service door after accessing the memory module slot, hard drive, regulatory label, and

other components.

Tilt down the service door to align the front edge of the service door near the front edge of the

computer (1).

Slide the service door forward (2) until the service door snaps into place.

With the battery bay toward you, slide the service door release latch to the right (3), and if you

choose to, insert and tighten the optional screw (4) to hold the service door in place. Slide the

release latch to the left to lock the service door (5).

NOTE:

If you want to use the optional screw, it is stored inside the service door.

Replacing or upgrading the hard drive

CAUTION:

To prevent information loss or an unresponsive system:

Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the

hard drive while the computer is on, in the Sleep state, or in Hibernation.

If you are not sure whether the computer is off, turn the computer on by pressing the power button.

Then shut down the computer through the operating system.

ENWW

Using hard drives 57

Advertising