HP Deskjet 3000 Printer - J310a - Manual (Page 29)

d. Close cartridge door.
5. Align cartridges.
Related topics
• Choose the right cartridges
• Order ink supplies
Use single-cartridge mode
Use the single-cartridge mode to operate the HP Printer with only one print cartridge. The
single-cartridge mode is initiated when a print cartridge is removed from the print cartridge
carriage. During single-cartridge mode, the product can only print jobs from the computer.
NOTE: When the HP Printer operates in single-cartridge mode, a message is
displayed on screen. If the message is displayed and two print cartridges are installed
in the product, verify that the protective piece of plastic tape has been removed from
each print cartridge. When plastic tape covers the print cartridge contacts, the product
cannot detect that the print cartridge is installed.
Exit single-cartridge mode
Install two print cartridges in the HP Printer to exit single-cartridge mode.
Related topics
Replace the cartridges
Cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP
printing device. This warranty does not cover HP ink products that have been refilled,
remanufactured, refurbished, misused, or tampered with.
Cartridge warranty information 27
Wo
rk
with
c
ar
trid
g
es