HP Officejet 6210v All-in-One Printer - Manual (Page 127)

1 Copper-colored contacts
2 Plastic tape with pink pull tab (must be removed before installing)
3 Ink nozzles under tape
Reinsert the print cartridges and verify that they are fully inserted and locked in
place.
Cause The contacts on the print cartridge are not touching the contacts in the
print carriage.
Solution Remove and then reinsert the print cartridges. Verify that they are
fully inserted and locked in place.
Cause The print cartridge or sensor is defective.
Solution Contact HP Support. Go to www.hp.com/support . If prompted,
choose your country/region, and then click Contact HP for information on calling
for technical support.
The HP all-in-one does not print
Solution If your HP all-in-one and computer are not communicating with each
other, try the following:
●
Check that the HP all-in-one print queue is not paused (Windows) or stopped
(Macintosh). If it is, choose the appropriate setting to resume printing. For
more information about accessing the print queue, see the documentation
that came with the operating system installed on your computer.
● Check the USB cable. If you are using an older cable, it might not be working
properly. Try connecting it to another product to see if the USB cable works.
If you experience problems, the USB cable might need to be replaced. Also
verify that the cable does not exceed 3 meters (9.8 feet) in length.
Chapter 15
124 HP Officejet 6200 series all-in-one