HP StorageWorks XP Remote Web Console Software - Manual (Page 226)

Table 45 Error Codes and Error Contents When Operating RAID Manager (continued)
Error Contents Error Code
(SSB2)
Error Code
(SSB1)
A request of XP Continuous Access Journal Paircreate or Pairresync was
received. However, the command was rejected because it could not access
the specified P-VOL or S-VOL. 8F28
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified master journal
group was unusable. 8F29
The XP Continuous Access Journal pair cannot be created because the
specified P-VOL is the S-VOL of XP FlashCopy. 8F2A
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the protect attribute of the
Data Retention Utility was set for the specified P-VOL. 8F2B
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volume was
used in a pair on the XP Continuous Access or the XP Business Copy. 8F33
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volume was
blocked. 8F35
The following programs for OPEN system may not be installed, or the
licenses might be expired: 8F38
•
XP Continuous Access Software
• XP Continuous Access Software Asynchronous
•
XP Continuous Access Journal Software
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the XP Continuous Access
Journal program was not installed. 8F39
The XP Continuous Access Journal pair cannot be created because the
cache CL2 is in the abnormal status. 8F46
The XP Continuous Access Journal pair cannot be created because the
cache CL1 is in the abnormal status. 8F47
The XP Continuous Access Journal pair cannot be created or
resynchronized due to the following contributing factors: 8F4D
•
A journal group is not registered in the secondary storage system.
• A volume in the journal group which is registered in the secondary
storage system is blocked.
A request of XP Continuous Access Journal Paircreate or Pairresync was
received. However, the operation cannot be performed because the load
of the processing was high. Wait about 5 minutes, then retry the operation. 8F50
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the status of the
configuration could not be transferred. 8F53
A request of XP Continuous Access Journal Paircreate or Pairresync was
received. However, the command was rejected because of one of the
following reasons: 8F58
• The pair status of the specified S-VOL differed from the one of P-VOL.
•
The state of restore journal group differed from the state of master
journal group.
226 Troubleshooting