HP Officejet 6700 Premium e-All-in-One Printer - H711n - Manual (Page 98)

Pages are skewing
•
Make sure the media loaded in the trays is aligned to the paper guides. If needed,
pull out the trays from the printer and reload the media correctly, making sure that
the paper guides are aligned correctly.
• Load media into the printer only when it is not printing.
• Remove and replace the automatic two-sided printing accessory (duplexer).
◦
Push the button on either side of the duplexer, and then remove the unit.
◦ Reinsert the duplexer into the printer.
Multiple pages are being picked up
•
Fan the media before loading.
• Make sure the paper guides are set to the correct markings in the tray for the
media size you are loading. Also make sure the guides are snug, but not tight,
against the stack.
• Make sure the tray is not overloaded with paper.
• Use HP media for optimum performance and efficiency.
Solve copy problems
If the following topics do not help, see HP support for information about HP support.
•
No copy came out
• Copies are blank
• Documents are missing or faded
• Size is reduced
• Copy quality is poor
• Copy defects are apparent
• The printer prints half a page, then ejects the paper
• Paper mismatch
Chapter 8
94 Solve a problem